My Business Diary http://mybusinessdiary01.wordpress.com Just another WordPress.com weblog Mon, 09 Jun 2008 11:00:33 +0000 http://wordpress.com/ en hourly 1 http://www.gravatar.com/blavatar/3547367324619907c33d447770c4a369?s=96&d=http://s.wordpress.com/i/buttonw-com.png My Business Diary http://mybusinessdiary01.wordpress.com Offering you more 5% discount http://mybusinessdiary01.wordpress.com/2008/06/09/offering-you-more-5-discount/ http://mybusinessdiary01.wordpress.com/2008/06/09/offering-you-more-5-discount/#comments Mon, 09 Jun 2008 10:54:06 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=21 ]]>

RS / 2008 / F028 / BMT#23 / RMPL_01

To,
R. V. ENG. WORKS
Plot No. 21, Suryanagar,
Nr. IBPL Colony,
HYDERABAD – 37
Fax No. 040 – 23087110
Mobile: 092465 47110

Kind Attn: Mr. RAO

Dear Sir,

SUB: OUR QUOTATION NO. RSQ/07-08/BMT#06/RVEW_01 dated 18/02/2008

With reference to the above and our telephonic discussion, here by we have enclosed our same catalogue once again for your reference.

However, we have already given you our reasonable rates but now considering our telephonic discussion, we are offering you more 5% discount on both our offered machine. We hope now our offer is very much fruitful to you.

So, looking forward to your valuable order at the earliest

Best Regards,

RAKSHIT SHAH
Zonal Sales Manager
Ph: +91 (079) 3007 4563
Fax: +91 (079) 3007 4477
Mobile: +91 94263 50243
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/09/offering-you-more-5-discount/feed/ 0 zonalmanagerrakshitshah REMINDER 1: OUR PENDING MACHINE ORDERS http://mybusinessdiary01.wordpress.com/2008/06/07/reminder-1-our-pending-machine-orders/ http://mybusinessdiary01.wordpress.com/2008/06/07/reminder-1-our-pending-machine-orders/#comments Sat, 07 Jun 2008 07:23:59 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=19 ]]>

REMINDER – 1

To,
RAM MACHINE TOOLS CORPORATION
8/A, Industrial Estate, Link Road,
Ludhiana – 03
Ph: 0161-2530090, 3253674
Mobile: 93169 08297, 98765 00027

KIND ATTN: MR. HARINDERPAL SINGH

Dear Sir,

With reference to the telephonic talk with Rohitbhai, following machine orders are pending with you:


Machine Name Qty. Required for…
Bolt Threading Machine (3/8” to 1½”) 2 Nos. Ahmedabad
Milling Machine & 18” Shaping Machine 1 No each Cuttack

You have confirmed us that you will be dispatching 1 no. of Bolt Threading today to Ahmedabad by Rajkot – Golden Transport and another will be dispatched by this Saturday (07/06/2008), so please make sure that it will reach to us as per the commitment.

Regarding the order for CUTTACK machine, you have confirmed that maximum by tomorrow you will be dispatching this machine. So, please dispatch the same maximum by tomorrow & send us the L/R details.

Thanking you,

Best Regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: 079 – 3007 4563
Fax: 079 – 3007 4477
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/07/reminder-1-our-pending-machine-orders/feed/ 0 zonalmanagerrakshitshah Please send revised C-Form (1946910) http://mybusinessdiary01.wordpress.com/2008/06/06/please-send-revised-c-form-1946910/ http://mybusinessdiary01.wordpress.com/2008/06/06/please-send-revised-c-form-1946910/#comments Fri, 06 Jun 2008 13:21:53 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=18 ]]>

RS / 2008 / F017 / SMT#04 / AF_01

To,
ACHAL FOUNDRY
Nr. Mahavir Talkies,
Railway Station Road,
Sumerpur – 306 902
Ph. 252253 / 253977

Dear Sir,

Sub: YOUR ‘C’ – FORM NO. 1946910

With reference to your above, we would like to inform you that here by we are sending back your “C” Form because Bill No. 5216 has not been added in the same so you are requested to add that Invoice details along with your stamp & signature and send us back at the earliest.

Regards,
For Shakti Machine Tools,

__________________
Authorised Signatory

]]> http://mybusinessdiary01.wordpress.com/2008/06/06/please-send-revised-c-form-1946910/feed/ 0 zonalmanagerrakshitshah Cancle the D.D. No. 272586 http://mybusinessdiary01.wordpress.com/2008/06/06/cancle-the-dd-no-272586/ http://mybusinessdiary01.wordpress.com/2008/06/06/cancle-the-dd-no-272586/#comments Fri, 06 Jun 2008 10:14:05 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=17 ]]>

RS / 2008 / F013 / SMT#03 / CBI_02

To,
THE MANAGER
CENTRAL BANK OF INDIA
Maskati Market Branch,
Relief Road,
Ahmedabad

Sub: CANCELLATION OF D.D.

Dear Sir,

We here by request you to cancel the enclosed Demand Draft and credit the amount in our A/c. No. 1022704936. Details are as under:

D. D. No… Amount Date
======== ========== ==========
272586 Rs. 91,500/- 18/01/2008

Regards,
For Shakti Machine Tools,

_________________
Authorised Signatory

]]> http://mybusinessdiary01.wordpress.com/2008/06/06/cancle-the-dd-no-272586/feed/ 0 zonalmanagerrakshitshah To get the order of Shaping Mc & Dog Chuck.. http://mybusinessdiary01.wordpress.com/2008/06/05/to-get-the-order-of-shaping-mc-dog-chuck/ http://mybusinessdiary01.wordpress.com/2008/06/05/to-get-the-order-of-shaping-mc-dog-chuck/#comments Thu, 05 Jun 2008 11:06:54 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=16 ]]>

RS / 2008 / F009 / BMT#06 / NIL_01

Neptune Industries Limited
297, GIDC, Vibhag – 2,
Dedisan, Mehsana
Fax: 02762 – 252070
Mobile: 098792 06976

KIND ATTN: MR. NAVINBHAI PANCHAL

Dear Sir,

Sub: Your Requirement of Shaping Machine & Dog Chuck


With reference to the personal visit of our Mr. Vinaybhai for the discussion of your above requirement, we would like to inform you that Mr. Vinaybhai has explained you about the quality of our offered machines but at that time you have asked for the other product what you have heard from any Rajkot Party. For that matter, we want to inform you that we have quoted DECENT brand Shaping Machine which is slightly costly then the other brands available at Punjab. We have also quoted price for that type of other machine, which price is lower than our offered DECENT brand Shaping Machine.

Further, you can’t make any judgment about the price & quality without seeing the machine. So we request you to send any of your technical persons at our place & we will show them both of our offered machines. After that if you wish, you can see your asked machine also so that you can compare them.

So, please inform us when you are sending your person to inspect our offered machine.

Thanking you & expecting your valuable order at the earliest.

Best regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: 079 – 3007 4563
Fax: 079 – 3007 4477
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/05/to-get-the-order-of-shaping-mc-dog-chuck/feed/ 0 zonalmanagerrakshitshah BMT Introduction Letter Sent by Email… http://mybusinessdiary01.wordpress.com/2008/06/05/bmt-introduction-letter-sent-by-email-8/ http://mybusinessdiary01.wordpress.com/2008/06/05/bmt-introduction-letter-sent-by-email-8/#comments Thu, 05 Jun 2008 10:03:57 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=15 ]]>

To,
ALFA ENGINEERING
10/14, Samrat Industrial Area,
Near S. T. Workshop,
Nr. Satyanarayan Way Bridge,
Gondal Road,
Rajkot – 360 004
Ph: 0281 – 2366233
Mobile: 98262 54922

KIND ATTN: Mr. Dilipbhai Patel / Mr. Dhaval Patel


Dear Sir,

We would like to inform you that we are one of the leading distributors of machine tools from India. Our H.O. is located at Ahmedabad, Gujarat, India; which is the heart of industrial machinery products. We have a team of 40 people & all our machines are inspected by our team of special engineers to provide quality assurance to our valuable customers. Further to inform you that on regular basis we are supplying machineries at Gulf & African Countries also.

We are having vast categories of machineries which are used in today’s industrial world. Here’s the list of major machine categories, we are supplying in…

WORKSHOP MACHINERIES…
Lathe Machine
Drill Machine
Shaping Machine
Slotting Machine
Milling Machine
Planning Machine
Grinding Machine
Hydraulic Hacksaw
Metal Cutting Band saw

SHEET METAL MACHINERIES…
Hydraulic Shearing Machine
Hydraulic Press Brake
Power Press
Fly Press
Mechanical Shearing Machine
Mechanical Press Brake
Plate Rolling Machine
Edge Bending Machine

AIR COMPRESSORS
WELDING MACHINES
SP. PURPOSE MACHINES
ELECTRIC MOTORS & POWER TOOLS

MACHINE TOOLS ACCESSORIES & EQUIPMENTS…
True Chuck, Dog Chuck, Coolant Pump, Quick Change Tool Post, Tool Post Grinder, Rotary Table, Vices etc…

IF YOU WANT MORE DETAILS THEN PLEASE REFER OUR WEBSITE… www.bhavyamachinetools.com

For your reference, hereby we have enclosed our catalogue also. So please refer the same and if you have any current requirements for any of these machineries then please contact us so that we can send you our quotation with our best lowest rates.

Thanking you,

Regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: +91 (079) 3007 4563
Fax: +91 (079) 3007 4477
Mobile: +91 94263 50243
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/05/bmt-introduction-letter-sent-by-email-8/feed/ 0 zonalmanagerrakshitshah Letter for Payment Term Negotiation http://mybusinessdiary01.wordpress.com/2008/06/05/letter-for-payment-term-negotiation/ http://mybusinessdiary01.wordpress.com/2008/06/05/letter-for-payment-term-negotiation/#comments Thu, 05 Jun 2008 09:18:17 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=13 ]]>

RS / 2008 / F008 / BMT#05 / PARIL_01

To,
PRECISION AUTOMATION & ROBOTICS (I) LTD.
S. No. 38/2, NARHE, TA. HAVELI
PUNE – 411 041
Ph: 020 – 2439 2080
Fax: 020 – 2439 2843
Mobile: 99224 07066
Email: girishk@parirobotics.com

KIND ATTN: GIRISH P. KALE


Dear Sir,

Sub: Our Performa Invoice No. BMT/2008/08 dated 19/05/2008

With reference to the above & your telephonic discussion with Mr. Paurav Shah, we here by clarify following points:

PAYMENT
As you have informed that you will give the payment after 15 days trial of your ordered machine. We want to inform you that this type of term we are not giving to any of our customers. But as yours is a Private Company, we are considering your request so…

80% PAYMENT SHOULD REACH TO US BEFORE THE DISPATCH OF THE MACHINE
20% PAYMENT YOU CAN PAY AFTER THE SATISFACTORY PERFORMANCE OF THE MACHINE
(It should reach to us maximum in 20 days from the date of Supply)

We would like to inform you that the quality we have offered you is one of the best products of Gujarat and we assure you about the quality and the performance of the machine.

We hope your query is solved now and looking forward to your valuable order at the earliest.

Best regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: 079 – 3007 4563
Fax: 079 – 3007 4477
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/05/letter-for-payment-term-negotiation/feed/ 0 zonalmanagerrakshitshah BMT Introduction Letter Sent by Email.. http://mybusinessdiary01.wordpress.com/2008/06/04/bmt-introduction-letter-sent-by-email-7/ http://mybusinessdiary01.wordpress.com/2008/06/04/bmt-introduction-letter-sent-by-email-7/#comments Wed, 04 Jun 2008 12:31:20 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=12 ]]>

To,
AFSA TRADERS
39, Central Avenue,
Central Avenue Road,
Nagpur – 440 018
Ph: 0712 – 5614284 / 85
Fax: 0712 – 5614286
Email: afsa@satyam.net.in

KIND ATTN: Mr. Shafi A. Akolawala


Dear Sir,

We would like to inform you that we are one of the leading distributors of machine tools from India. Our H.O. is located at Ahmedabad, Gujarat, India; which is the heart of industrial machinery products. We have a team of 40 people & all our machines are inspected by our team of special engineers to provide quality assurance to our valuable customers. Further to inform you that on regular basis we are supplying machineries at Gulf & African Countries also.

We are having vast categories of machineries which are used in today’s industrial world. Here’s the list of major machine categories, we are supplying in…

WORKSHOP MACHINERIES…
Lathe Machine
Drill Machine
Shaping Machine
Slotting Machine
Milling Machine
Planning Machine
Grinding Machine
Hydraulic Hacksaw
Metal Cutting Band saw

SHEET METAL MACHINERIES…
Hydraulic Shearing Machine
Hydraulic Press Brake
Power Press
Fly Press
Mechanical Shearing Machine
Mechanical Press Brake
Plate Rolling Machine
Edge Bending Machine

AIR COMPRESSORS
WELDING MACHINES
SP. PURPOSE MACHINES
ELECTRIC MOTORS & POWER TOOLS

MACHINE TOOLS ACCESSORIES & EQUIPMENTS…
True Chuck, Dog Chuck, Coolant Pump, Quick Change Tool Post, Tool Post Grinder, Rotary Table, Vices etc…

IF YOU WANT MORE DETAILS THEN PLEASE REFER OUR WEBSITE… www.bhavyamachinetools.com

For your reference, hereby we have enclosed our catalogue also. So please refer the same and if you have any current requirements for any of these machineries then please contact us so that we can send you our quotation with our best lowest rates.

Thanking you,

Regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: +91 (079) 3007 4563
Fax: +91 (079) 3007 4477
Mobile: +91 94263 50243
Email: zsm.bmt@gmail.com

Attachments: Bhavya 1 ~ 4
(Catalogue Pages – General Red Catalogue)

]]> http://mybusinessdiary01.wordpress.com/2008/06/04/bmt-introduction-letter-sent-by-email-7/feed/ 0 zonalmanagerrakshitshah What’s the Status of Our Pending Mc Orders? http://mybusinessdiary01.wordpress.com/2008/06/04/whats-the-status-of-our-pending-mc-orders/ http://mybusinessdiary01.wordpress.com/2008/06/04/whats-the-status-of-our-pending-mc-orders/#comments Wed, 04 Jun 2008 11:30:45 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=11 ]]>

RS / 2008 / F006 / BMT#02 / RMTC_01

To,
RAM MACHINE TOOLS CORPORATION
8/A, Industrial Estate, Link Road,
Ludhiana – 03
Ph: 0161-2530090, 3253674
Mobile: 93169 08297, 98765 00027

KIND ATTN: MR. HARINDERPAL SINGH


Dear Sir,

With reference to the telephonic talk with Rohitbhai, following machine orders are pending with you:

Machine Name Qty. Required for…
Bolt Threading Machine (3/8” to 1½”) 2 Nos. Ahmedabad
Milling Machine & 18” Shaping Machine 1 No each Cuttack

You have confirmed us that you will be dispatching 1 no. of Bolt Threading today to Ahmedabad by Rajkot – Golden Transport and another will be dispatched by this Saturday (07/06/2008), so please make sure that it will reach to us as per the commitment.

Regarding the order for CUTTACK machine, you have confirmed that maximum by tomorrow you will be dispatching this machine. So, please dispatch the same maximum by tomorrow & send us the L/R details.

Thanking you,

Best Regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: 079 – 3007 4563
Fax: 079 – 3007 4477
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/04/whats-the-status-of-our-pending-mc-orders/feed/ 0 zonalmanagerrakshitshah BMT Introduction Letter Sent by Email… http://mybusinessdiary01.wordpress.com/2008/06/04/bmt-introduction-letter-sent-by-email-6/ http://mybusinessdiary01.wordpress.com/2008/06/04/bmt-introduction-letter-sent-by-email-6/#comments Wed, 04 Jun 2008 10:14:40 +0000 zonalmanagerrakshitshah http://mybusinessdiary01.wordpress.com/?p=10 ]]>

To,
Aerial Electric Company
A/16, Shree Ram Indl Estate,
G. D. Ambedkar Road, Wadala
Mumbai – 400 031
Ph: 022 – 24147566
Fax: 022 – 24151674

KIND ATTN: Mr. RANDHIR PARIKH


Dear Sir,

We would like to inform you that we are one of the leading distributors of machine tools from India. Our H.O. is located at Ahmedabad, Gujarat, India; which is the heart of industrial machinery products. We have a team of 40 people & all our machines are inspected by our team of special engineers to provide quality assurance to our valuable customers. Further to inform you that on regular basis we are supplying machineries at Gulf & African Countries also.

We are having vast categories of machineries which are used in today’s industrial world. Here’s the list of major machine categories, we are supplying in…

WORKSHOP MACHINERIES…
Lathe Machine
Drill Machine
Shaping Machine
Slotting Machine
Milling Machine
Planning Machine
Grinding Machine
Hydraulic Hacksaw
Metal Cutting Band saw

SHEET METAL MACHINERIES…
Hydraulic Shearing Machine
Hydraulic Press Brake
Power Press
Fly Press
Mechanical Shearing Machine
Mechanical Press Brake
Plate Rolling Machine
Edge Bending Machine

AIR COMPRESSORS
WELDING MACHINES
SP. PURPOSE MACHINES
ELECTRIC MOTORS & POWER TOOLS

MACHINE TOOLS ACCESSORIES & EQUIPMENTS…
True Chuck, Dog Chuck, Coolant Pump, Quick Change Tool Post, Tool Post Grinder, Rotary Table, Vices etc…

IF YOU WANT MORE DETAILS THEN PLEASE REFER OUR WEBSITE… www.bhavyamachinetools.com

For your reference, hereby we have enclosed our catalogue also. So please refer the same and if you have any current requirements for any of these machineries then please contact us so that we can send you our quotation with our best lowest rates.

Thanking you,

Regards,
For Bhavya Machine Tools,

RAKSHIT SHAH
Zonal Sales Manager
Ph: +91 (079) 3007 4563
Fax: +91 (079) 3007 4477
Mobile: +91 94263 50243
Email: zsm.bmt@gmail.com

]]> http://mybusinessdiary01.wordpress.com/2008/06/04/bmt-introduction-letter-sent-by-email-6/feed/ 0 zonalmanagerrakshitshah